Crestron DM-RMC-SCALER-C Receiver & Room Controller w/Scaler - New, Open Box SKU: DM-RMC-SCALER-C-OB
New
DigitalMedia 8G+® Receiver & Room Controller w/Scaler
The DM-RMC-SCALER-C provides an advanced one-box interface solution for a single display device as part of a complete Crestron® DigitalMedia™ system. It functions as a DM 8G+® receiver, video scaler, and control interface. It provides a single HDMI® output along with Ethernet, USB HID, RS-232, and IR control ports. In addition to DM 8G+, it is also compatible with HDBaseT®, allowing it to be connected directly to an HDBaseT certified source. Built-in scaling enables the connected display to handle any video resolution up to HD 1080p or WUXGA. Its compact, low-profile design allows the DM-RMC-SCALER-C to be installed discreetly behind a flat panel display or above a ceiling mounted projector. It connects to the head end or source location using a single CAT type twisted pair cable.[1]
Key Features
- DigitalMedia 8G+® receiver, high-definition scaler, and display controller
- Connects to a DM® switcher or transmitter over a single CAT type twisted pair cable [1]
- Supports cable lengths up to 330 ft (100 m) using DM 8G® cable or CAT5e [1]
- HDBaseT® Certified — Enables direct connection to other HDBaseT certified equipment
- Provides one HDMI® or DVI display output [2]
- Handles any video resolution from standard NTSC 480i or PAL 576i, to HD 1080p60 w/Deep Color
- Handles any computer resolution from VGA to UXGA/WUXGA
- Scales the signal to match the native resolution of virtually any digital video display or computer monitor up to 1080p or WUXGA
- Provides intelligent frame rate conversion
- Includes content-adaptive noise reduction
- Allows motion-adaptive de-interlacing or interlacing
- Allows adjustable overscan or underscan up to 7.5%
- Provides automatic 3D to 2D signal conversion [3]
- Automatically passes 3D video without scaling to 3D capable displays [3]
- Supports left/right eye steering for dual-projector 3D setups [3]
- Scalable zoom feature enables 2x2, 3x2, 3x3, 4x3, or 4x4 video wall capability [6]
- Handles Dolby® TrueHD, DTS-HD®, and uncompressed 7.1 linear PCM audio
- HDCP compliant
- Provides a 10/100 Ethernet LAN connection
- Enables device control via CEC, IR, RS-232, and Ethernet
- Enables USB HID signal extension for a local keyboard/mouse
- Compatible with Crestron® USB over Ethernet Extenders [5]
- Allows quick, easy setup and diagnostics
- Low-profile design mounts to a 2-gang US, UK, or European wall box
- Universal power pack included
- For DM 8G+ or HDBaseT wiring, use Crestron DM-CBL-8G DigitalMedia 8G Cable or third-party CAT5e (or better) UTP or STP. (Crestron legacy DM-CBL DigitalMedia Cable or DM-CBL-D DigitalMedia D Cable may also be used.) The maximum wire length for DM 8G+ is 330 ft (100 m) between devices. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines. DM 8G+ is compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment. All wire and cables are sold separately.
- The HDMI output requires an appropriate adapter or interface cable to accommodate a DVI signal. CBL-HD-DVI interface cables are available separately.
- Automatically passes 3D video if the display device supports it (reverts to pass-through mode without scaling). Provides automatic 3D-to-2D conversion (with scaling) if the display device does not support 3D. 3D with scaling is only supported using two DM-RMC-SCALER-Cs configured for use with a dual-projector 3D setup.
- EDID (Extended Display Identification Data) is data embedded in an HDMI, DVI, or VGA signal that enables a display device to tell the source device what resolutions and formats it can support, allowing the source to configure itself automatically to feed the best signal that both devices can support.
- USB-EXT-DM USB over Ethernet Extender Modules are sold separately. Refer to the USB-EXT-DM spec sheet for more information.
- Video wall processing requires a separate DM-RMC-SCALER-C for each individual display.
(DM-RMC-SCALER-C-OB)
Video |
||
Scaler | HD video scaler, motion-adaptive deinterlacer, interlacer, intelligent frame rate conversion, Deep Color support, 3D to 2D conversion[3], content-adaptive noise reduction, widescreen format selection (zoom, stretch, maintain aspect-ratio, or 1:1), video wall processing (2x2, 3x2, 3x3, 4x3, or 4x4)[6] | |
Input Signal Types | DM 8G+® (DigitalMedia™ over one CAT type twisted pair copper wire), HDBaseT®[1] | |
Output Signal Types | HDMI®, DVI[2] | |
Formats | DM 8G+, HDBaseT, & HDMI w/Deep Color & 3D[3]; DVI; HDCP content protection support | |
Input Resolutions, Progressive | 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@25Hz (1080p25), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, plus any other resolution allowed by HDMI up to 165MHz pixel clock | |
Input Resolutions, Interlaced | 720x480@30Hz (480i), 720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus any other resolution allowed by HDMI up to 165MHz pixel clock | |
Scaler Output Resolutions, Progressive | 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 1024x768@60Hz[7], 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz[7], 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1366x768@60Hz[7], 1400x1050@60Hz[7], 1440x900@60Hz[7], 1600x900@60Hz[8], 1600x1200@60Hz, 1680x1050@60Hz[7], 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz[8], 2048x1152@60Hz[8] | |
Scaler Output Resolutions, Interlaced | 720x480@30Hz (480i), 720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30) | |
Pass-Thru Output Resolutions | Matched to input | |
Audio |
||
Input Signal Types | DM 8G+, HDBaseT | |
Output Signal Type | HDMI | |
Formats | Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™, up to 8ch PCM | |
Communications |
||
Ethernet | 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP | |
USB | Supports signal extension of USB HID class devices, expandable to support virtually any USB 1.1 or 2.0 device using Crestron USB-EXT-DM USB over Ethernet Extenders[5] | |
RS-232 | 2-way device control and monitoring up to 115.2k baud with hardware and software handshaking | |
IR/Serial | 1-way device control via infrared up to 1.1 MHz or serial TTL/RS-232 (0-5 Volts) up to 19.2k baud | |
DigitalMedia | DM 8G+, HDCP, EDID, CEC, Ethernet | |
HDBaseT | HDCP, EDID, Ethernet | |
HDMI | HDCP, EDID, CEC | |
NOTE: Supports management of HDCP and EDID; supports management of CEC between the connected HDMI device and a control system | ||
Connectors – Bottom |
||
HDMI OUT | (1) 19-pin Type A HDMI female; HDMI digital video/audio output; Also supports DVI[2] |
|
USB HID | (1) USB Type A female; USB 2.0 host port for connection of a mouse/keyboard or other USB HID-compliant device |
|
COM | (1) 5-pin 3.5mm detachable terminal block, bidirectional RS-232 port; Up to 115.2k baud, hardware and software handshaking support |
|
IR 1 – 2 | (1) 4-pin 3.5mm detachable terminal block comprising (2) IR/Serial ports; IR output up to 1.1 MHz; 1-way serial TTL/RS-232 (0-5 Volts) up to 19200 baud |
|
Connectors – Top |
||
LAN | (1) 8-wire RJ45 female, shielded; 10Base-T/100Base-TX Ethernet port |
|
24VDC 0.75A MAX | (1) 2.1 x 5.5 mm DC power connector; 24 Volt DC power input; PW-2407WU power pack included |
|
Connectors – Rear |
||
G | (1) 6-32 screw, chassis ground lug | |
DM IN | (1) 8-pin RJ45 female, shielded; DM 8G+ input, HDBaseT compliant; Connects to the DM 8G+ output of a DM switcher, transmitter, or other DM device, or to a HDBaseT device, via CAT5e or Crestron DM-CBL-8G cable[1] |
|
Controls & Indicators |
||
PWR | (1) green LED, indicates operating power supplied via local power pack | |
DM LINK | (1) green LED, indicates DM link status | |
VIDEO | (1) green LED, indicates video signal presence and lock status | |
USB HID | (1) green LED, indicates a valid device connection and activity on the USB HID port | |
SETUP | (1) red LED and (1) miniature recessed pushbutton, for Ethernet setup | |
RESET | (1) miniature recessed pushbutton, for hardware reset | |
LAN (Top) | (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity | |
DM IN (Rear) | (2) LEDs, green LED indicates DM link status, amber LED indicates video and HDCP signal presence | |
Power Requirements |
||
Power Pack | 0.75 Amps @ 24 Volts DC; 100-240 Volts AC, 50/60 Hz power pack, model PW-2407WU included |
|
Environmental |
||
Temperature | 32° to 104°F (0° to 40°C) | |
Humidity | 10% to 90% RH (non-condensing) | |
Heat Dissipation | 41 BTU/Hr | |
Enclosure |
||
Chassis | Metal, black finish, vented sides and front | |
Mounting | Mounts to a 2-gang electrical box, 2-gang UK (BS 4662) electrical box, or 2-gang European (DIN 49073) electrical box | |
Dimensions |
||
Height | 7.62 in (194 mm) | |
Width | 7.61 in (194 mm) | |
Depth | 1.46 in (37 mm) | |
Weight |
||
1.90 lb (0.87 kg) |
- For DM 8G+ or HDBaseT wiring, use Crestron DM-CBL-8G DigitalMedia 8G Cable or third-party CAT5e (or better) UTP or STP. (Crestron legacy DM-CBL DigitalMedia Cable or DM-CBL-D DigitalMedia D Cable may also be used.) The maximum wire length for DM 8G+ is 330 ft (100 m) between devices. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines. DM 8G+ is compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment. All wire and cables are sold separately.
- The HDMI output requires an appropriate adapter or interface cable to accommodate a DVI signal. CBL-HD-DVI interface cables are available separately.
- Automatically passes 3D video if the display device supports it (reverts to pass-through mode without scaling). Provides automatic 3D-to-2D conversion (with scaling) if the display device does not support 3D. 3D with scaling is only supported using two DM-RMC-SCALER-Cs configured for use with a dual-projector 3D setup.
- EDID (Extended Display Identification Data) is data embedded in an HDMI, DVI, or VGA signal that enables a display device to tell the source device what resolutions and formats it can support, allowing the source to configure itself automatically to feed the best signal that both devices can support.
- USB-EXT-DM USB over Ethernet Extender Modules are sold separately. Refer to the USB-EXT-DM spec sheet for more information.
- Video wall processing requires a separate DM-RMC-SCALER-C for each individual display.
- With or without reduced blanking.
- With reduced blanking only.
SKU | DM-RMC-SCALER-C-OB |
Barcode # | 659675558219 |
Brand | Crestron |
Brand | Crestron |
Type | Video Extender |
Model | DM-RMC-SCALER-C |
Shipping Cubic | 0.017794000m3 |
Be The First To Review This Product!
Help other Australian Computer Traders users shop smarter by writing reviews for products you have purchased.
Frequently Bought Together
Others Also Bought
Similar Items
Buying refurbished laptops not only gives you savings it helps reduce the environmental impact of e-waste