The Aironet 1500 Series power injector is an indoor unit that combines 56 VDC power from its internal supply with the Ethernet data signal and sends both to a connected Aironet access point over a single cable. It suits deployments where no suitable PoE switch port or local power is available at the access point location, particularly outdoor mesh and access point installations.

It provides one 10/100/1000 RJ-45 data input and one PoE output, delivering up to 80 W over all four wire pairs. Output is 56 VDC (54 to 57 VDC tolerance) at a maximum of 1.43 A, split across two outputs of 56 VDC at 0.71 A each. The wide-range AC input accepts 100 to 240 VAC through an IEC 60320 C14 inlet, and the unit operates from -40 to 55 C.

The injector is designed for shielded, outdoor-rated Cat 5e or higher cable (26 AWG). The run from injector to access point should be more than 3 m and less than 42 m, with a total cable length from switch to access point of no more than 100 m. It is intended for Cisco Aironet 1520, 1530, 1550 and 1570 series outdoor access points.

(AIR-PWRINJ1500-2)

Be The First To Review This Product!

Help other Australian Computer Traders users shop smarter by writing reviews for products you have purchased.

Write a product review

Frequently Bought Together

Similar Items

Buying refurbished laptops not only gives you savings it helps reduce the environmental impact of e-waste